SUNWAYMAN·V10R Ti² Collector’s Edition

[biomeccanoide]

Ragazzi mi è arrivato il pacchetto dalla Sunwayman con il bezel ed il pulsante di ricambio.
Ho sostituito il bezel: perfetto.
Il pulsante invece ancora no in quanto stavo valutando se tenermi quello ballerino sulla Ti2 e metterlo nella Ti v1 in sostituzione di quello di gomma. Anche se questo non mi sembra meno ballerino.
Comunque il pulsante non è altro che un normale pulsante di gomma ricoperto con un sottile sovrapulsante di titanio.

Ora mi avanza anche un bezel in titanio color oro leggermente rigato. vedremo come impiegarlo.

[Hakyru]

Cazzarola,hanno fatto presto ad inviarti il tutto!

Molto bene

Ora mi avanza anche un bezel in titanio color oro leggermente rigato. vedremo come impiegarlo.

Te lo prendo io,cosi trasformo la mia V10R Ti2 black in una gold/black

[biomeccanoide]

Vi riporto il messaggio di scuse della SUNWAYMAN apparso su CPFMarketPlace:

Statement of apology – V10R Ti2 Edition,

Dear Consumers,

First of all, thank you for your support of our products.

About Ti2 Limited Collector's Edition on some products which have the appearance of flaws (mainly gold version of the Ti2), I represent the company and on behalf of Sunwayman, for we did not reach your expectations of us, I am very sorry to bring you down, I would like to express our sincere apologies to affected consumers and dealer friends.

I read some consumer photos, my feeling is shocked and ashamed. Defective product is no way to allow our customers to accept, even though I cannot accept. For this defective product inconvenience and unpleasant to you, I apologize to you sincerely and solemnly.

After my investigation, I believe such a bad product is given to processing time outsource, outward processing plant caused by improper operation. We have our own oxidation plant, but do not have the ability to titanizing; it must be outsourced to professional plant processing. In addition, we send to each flashlight processing of titanizing, there is a process, before and after outsourcing, all the flashlight housing will do a high gloss polishing in order to remove the surface defects.

In our experience, TC4 titanium flashlight surface material is very easy to grind scratches, so we will study a better way to deal with is titanizing, because titanizing surface hardness than the surface of the material itself hardness, which can make some deep scratches can be avoided.

We try to do every detail of the performance of a perfect process in our own factory, but we have reason to believe that these scratches the surface of our outward processing, the titanizing plant operational problems leading to such a situation.

I've been to investigate the QC department, I believe most of them sub-standard housing are not assembled, but directly scrapped. However, there is still some non-compliance of the housing ready to go out, I said such a thing ashamed and deeply regret.

Titanium flashlight rejection rate is very high; titanizing scrap rate is higher too, so it cannot be mass produced. Moreover, the small volume of outward processing, other side simply not cares about our order, no matter how much we pay the cost.

As a manager, I will not evade responsibility, and in fact, I am also a flashlight enthusiast, this is our project architect Ti2 leading products, we originally did not intend to produce, because we cannot grasp this technology, only able to rely on vendor implementation. We have to find a prestigious in the industry to deal with the Titanizing processing plant in Taiwan's technology which we cannot take part, our strength is the oxidation of military regulations, because the oxidation of our own factory can be well controlled quality, but the quality of Titanizing, frankly we cannot take control. And we know that the risk of Titanizing, we have to implement this project because too many dealers and comply with the requirements of flashlight enthusiasts implementation.

Moreover, the Titanizing processing plant owned by Taiwan, because of our small quantity, they are simply unwilling to meet us on the processing requirements, so we forced to use the return approach if consumers feel do not meet the project's quality. Our company now simply cannot grasp and commitment is to achieve the standard of reproduction of flashlight enthusiast’s requirements, so we have the return of unsatisfactory customers handling arrangements.

Of course, we hope to create the perfect product, but in the current technology, even if I went to Switzerland to find the best supplier of surface treatment, I am afraid we cannot meet the requirements.

We can never see a brand dare to handle their products, I mean titanium flashlight Titanizing processing. This is one of our ideas, may we think of such treatment is really too idealistic. In fact, the current level of manufacturing industry, it is difficult to achieve the requirements of our flashlight enthusiasts. So if dissatisfied consumer products, the current refund is the only way.

The fact is, Ti2 version of the V10R project, we originally did not intend to proceed. We can trace the first time we deal with this unofficial release of titanium flashlight, probably in three or four months ago. At that time this practice is on the surface of titanium flashlight a bold attempt. But surprisingly this attempt caused a great response, including dealers and flashlight enthusiasts, every day they have urged us to launch this product as their flashlight enthusiasts collection. We do not intend to start is to profit, just to satisfy the requirements of flashlight enthusiasts.

However, in the present case, if consumers are not satisfied with the product, regrettably, to refund is the only thing I can do at the moment. I attach great importance to every consumer's feelings, but I do not want to make sure I do not promise, because the outward processing this aspect is no way to fully grasp.

If this product is currently not acceptable for the consumers, we can only choose to refund the decision, and in the business of the above, we do not intend to re-produce because that consumer demand and we are not sure in mass production to meet the stringent requirements of consumers and us.

The best Titanizing processing technology, according to our measurement, but is used in the aluminum alloy material, rather than titanium. But prior to the Titanizing, aluminum alloy plus a layer of nickel in order to have perfect results.

However, the production of aluminum and titanium flashlight, and its value relatively large difference, not in general practical to consider, but in lightweight materials and to measure the value and stability, so we believe that nickel titanium material above is not take attempt.

Throughout, this Ti2 project is considered a failure, because we cannot get the consumer's satisfaction. If we could have enough strength to deal with a perfect grasp of Titanizing processing technology, at that time is our most appropriate time to launch such an idealized product.

Dear customer, I hope you can read my entire statement, acceptance of my apology and tolerant of our mistakes. If you really cannot accept our products, please apply a refund (because of the appearance of Titanizing is basically no way to deal with, this is really a very hard coating), I once again to the affected consumers and dealers expressed deep apologies

Finally, this matter so that our company on a very important lesson, in the days ahead, the company's operations on I will always remember all of you in every aspect to our the teachings are very grateful.

Thank you very much.


Yours Sincerely,

Richard Zhou
CEO / COO

Io alla luce del loro comportamento nei miei confronti non posso che esprimere il mio apprezzamento per la loro estrema professionalità e correttezza: Grande SUNWAYMAN!

Te lo prendo io,cosi trasformo la mia V10R Ti2 black in una gold/black

Hai PM

[Alien]

È con grande soddisfazione che ho visto che luxtrail le ha esaurite.
Non riuscivo più a resistere dall'acquistarla.

[Budda]

ok per il comportamento della sun... ma fare un test / prototipo no?

[Erlige]

ok per il comportamento della sun... ma fare un test / prototipo no?

Oppure un controllo qualità alla fine del ciclo di produzione? Su poche centinaia di pezzi non dovrebbe essere un problema mettere un ominide a verificare a manina uno ad uno tutti i pezzi completati

[Budda]

può essere che la cosa sia apparsa dopo tempo, magari legata al trasporto (vedi faccenda manici in legno dei bowie che era capitata con GDA di ombra sul vecchio MCKF).

rimango della mia idea che far produrre 20 pezzi, spedirli in giro ai primi 20 con un piccolo sconto e chiedere silenzio su eventuali problemi per fare da beta tester... costi molto meno.

[Hakyru]

@ Biomeccanoide:
Oggi mi é arrivato il tuo bezel

Si intona sulla V10R in alluminio?



Oppure sta meglio sulla V10R Ti?



Che ne pensi?
Magari più tardi faccio una prova anche con la V10R Ti2 Black.

[Torch65]

Se è quello graffiato io lo scartavetrerei in modo da tirar fuori il colore del titanio e lo installerei sulla versione in alluminio.

[biomeccanoide]

Lo preferisco sulla versione alluminio!
lo avevo provato anche io su quella in Ti ma non mi esaltava.

Anche il consiglio di torch è ottimo e se vuoi sperimentare lo puoi anodizzare con una torcia al butano.