cpfitalia forum

http://www.hobbyking.com/hobbyking/stor ... aff=261539




The Turnigy Accucel 6 Balance Charger utilises quality FETs and resistors to accurately balance and charge Lithium Polymer and NiMH batteries.
The Accucel-6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately either at the field by using a 12v input such as a car battery or at home with a 12v power supply.
Bundled with the Accucel-6 is a bunch of input and output wires which should satisfy any charging requirement.

ATTENTION.
There are several chargers now entering the China market that look similar to the Accucel. These chargers are produced with cheaper FETs and are unfortunately much less accurate and very unsafe. There has been reports of the copied chargers over-charging packs and not balancing correctly.
The Accucel-6 is the first charger in the market with this PCB layout Circuit design. Any charger with the same circuit diagram is most definitely a copy. We have tested the copied chargers ourselves, their componentry is of a very low quality and the manufacturing company that has produced the copy has used a process of duplicating our CPU(MCU)s hex file and flashed a similar chip(MCU) to produce a similar product. This means they do not have the original code and therefore cannot bug-test(QC) or update the charger at any point.
Our chargers have CE and RoHS certification, proving their safety.
Plus, thousands of customers the world over have used our chargers with excellent results.
Your batteries are expensive. We understand this and thats why we will not carry low-quality charging devices.
Trust only in TURNIGY® quality charging devices.

Features;
Microprocessor controlled
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.

Spec.
Input Voltage: 11~17v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~6.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 355g

This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, TURNIGY and any pack with a JST-XH adapter.

Note: Power supply not included.

Davvero un bel gioiellino, non mi è chiaro il prezzo, $22.99?

si un oggettino davvero interessante... sia per qualità che prezzo
dato che ci sto facendo un pensierino, Budda mi chiedevo se lo hai già preso oppure era solo una segnalazione

edit: segnalo che ci vuole anche un alimentatore (non in dotazione) per farlo funzionare

Ne approfitto pure per segnalare il link di Turnigy Italia (€ 35,99)

segnalazione.
in germania c'è in stock questo a 40$
http://www.hobbyking.com/hobbyking/stor ... ouse_.html

Non sono riuscito a capire come si interfacci con le pile da ricaricare.
Con i cavi forniti direttamente mi pare proprio di no,perciò,io penso,i cavi si collegano ad altrettanti scatolotti contenitori
per i vari tipi di pile che il charger è in grado di caricare.
Oppure dico fesserie..?
Mi pare,comunque,che possa ricaricare molti tipi di batterie,sia Li-Ion che Ni-Mh,e proprio per queste ultime mi interesserebbe
un caricabatterie,visto che per le Litio sono già ben servito dal Soshine
Avrei anche un caricabatterie dell'Alcava,piuttosto anzianotto,in grado di ricaricare fino a 8 pile AAA o AA,ma non sò come e se possa ricaricare anche altre pile.
Nelle succinte istruzioni dicono che può ricaricare solo batterie a carica"RAM".