18650 sanyo

Nimh..LiPo...LiIo.....ecc.....
Rispondi
Avatar utente
desmo999
Messaggi: 147
Iscritto il: 24/02/2011, 16:18

18650 sanyo

Messaggio da desmo999 » 24/07/2011, 14:02

Ho smontato una batteria di un portatile acer 11.1 volt 4000 mAh, dentro c'erano 6 batterie 18650 rosse con scritto e xleqy7 056755 che dovrebbero essere sanyo dalla scritta sull'involucro principale. Come posso sapere l'amperaggio visto che non mi ricordo come erano montate e se sono protette o no? In una spark st6-500cw durano circa un ora e venticinque minuti contro un ora e quarantacinque minuti di una ultrafire da 2400 mAh. Nelle specifiche la torcia la danno per 2,5 ore con una 18650. Che mi dite?

Avatar utente
bonanino
Messaggi: 646
Iscritto il: 24/02/2011, 18:31
Località: dobbiaco (BZ)

Re: 18650 sanyo

Messaggio da bonanino » 24/07/2011, 14:11

sono da 2000 mah.

Avatar utente
biomeccanoide
Messaggi: 594
Iscritto il: 08/06/2011, 0:20

Re: 18650 sanyo

Messaggio da biomeccanoide » 13/08/2011, 14:35

Anche io ho aperto il pacco batterie del mio vecchio ACER che aveva queste caratteristiche: 14.8V e 4400mAhr.
Dentro c'erano 8 batterie rosse 18650 con questa scritta: IKNF JT7 034194
Qualcuno sa dirmi le caratteristiche di queste batterie?
Sto aspettando che mi arrivi un multimetro ordinato on-line per fare le varie verifiche.
Comunque on-line su CPFinternational ho trovato un tipo che dava queste dritte che potrebbero tornare utili a tutti per utilizzare tali batterie.
"Here's the recipe I use to determine which cells are healthy enough to be usable. If any of you see something that could be improved, please let me know (I think I'm probably being too conservative, but don't really know for sure).

1. measure cell voltage. if it's less than 2.5v, throw it away.
2. charge the cell. if it gets hot during charging, throw it away.
3. measure cell voltage off the charger. verify it's between 4.1 and 4.2v.
4. wait 30 minutes
5. measure cell voltage. if it's fallen less than 4v, throw it away. Otherwise record the voltage.
6. store cell for 3+ days in cool, dry place.
7. measure cell voltage. if cell voltage has fallen more than .1v from the recorded voltage, throw it away.

Any cell that hasn't been thrown away by the time I'm through with step 7, I keep and put into my regular cell rotation.

EDIT: I'm no authority, but since nobody tried to correct me, I'm willing to assume that there's nothing obviously wrong with the above recipe.

--flatline "

Rispondi