[Recensione] Zebralight H51F by dorgabri

Qui trovate le recensioni degli utenti
Bloccato
Avatar utente
dorgabri
Messaggi: 2874
Iscritto il: 24/02/2011, 15:01

[Recensione] Zebralight H51F by dorgabri

Messaggio da dorgabri » 01/07/2011, 14:13

8-) Scusate il ritardo ma in questo periodo non ho molto tempo per recensire questa fantastica torcia da testa. 8-)

Immagine

Immagine


Iniziamo subito ad elencare i suoi dati tecnici direttamente dal sito zebralight:

Main Features and Specifications

°LED: Cree XP-G Cool White (color temperature 6100-6500 K)
°User Selectable Levels: 3 main level (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.
°Light Output
High: H1 190 Lm (0.9 hrs) or H2 95 Lm (2.4 hrs) / 133 Lm (1.7 hrs) / 4Hz Strobe
Medium: M1 28 Lm (9 hrs) or M2 7 Lm (30 hrs)
Low: L1 2.4 Lm (3 days) or L2 0.2 Lm (16 days)
°Light output are out the front (OTF) values. Runtime tests are done using Sanyo 2000mAh Eneloop AA batteries.
°The 190, 133, 28, 7 and 2.4 Lumen output levels are current regulated. The 95 and 0.2 Lumen output levels are PWM generated.
°Operating Voltage Range: 0.7V - 2.5V
°Battery: One 1.5V AA (NiMH, lithium or alkaline). 14500 Li-ion batteries are not supported. Batteries are not included in the package.
°Parasitic Drain: Negligible (equivalent to 16 years)
°Beam Type
90° beam spread
Dimensions
Diameter: 0.90 inch (23 mm)
Length: 3.2 inch (81 mm)
Weight
1.2 oz (35.8 gram)
2.2 oz (61.9 gram) with an Eneloop AA
3.0 oz (84.9 gram) with an Eneloop AA and headband
Features
°Electronic soft-touch switch, with a 200,000 cycle operating life
°Smart user interface provides fast and easy access to all brightness levels
°Precision machined unibody casing from premium grade Alcoa aluminum bar stock
°Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to over 94% of the surface area.
°Durable natural hard anodized finish (Type III Class I)
°Tempered optical grade ground glass
°Orange peel textured reflector
°Glow In The Dark (GITD) silicone ring near the tail cap
°Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
°Waterproof to IPX8 (2 meters, 30 minutes)



CONFEZIONE:

La confezione comprende oltre la torcia gli o-ring di ricambio la fascia da testa con il porta torcia in GITD o in gomma normale,la clip e il manuale d'uso.

Immagine



IMPRESSIONI ESTERNE:

-Le mie prime impressioni sono buone,infatti questa torcia è costruita come si deve.
-Quando la si prende in mano risulta molto robusta, e oserei dire quasi indistruttibile.
-Il design è azzeccato e le alette non sono li solo per estetica ,infatti il loro lavoro di dissipare il calore riesce abbastanza bene.
-L'anodizzazione è ben fatta e pare che abbia molto spessore.

-Il pulsante di accensione è di tipo elettronico e si riesce ad avere un buon feeling essendo anche in gomma morbida.

Immagine

-La clip in dotazione è fatta in acciaio tenace, e togliendola o rimettendola ripetutamente sulla torcia non scalfisce
l'anodizzazione(cosa molto importante),e scorre molto bene su qualunque tessuto e non si deforma! 8-)

Immagine[/URL]



IMPRESSIONI INTERNE:

-La qualità della filettatura è ottima, a pari livello della Surefire,hanno pochissimo gioco e scorrono abbastanza bene.

Immagine

Immagine

-Gli spessori della torcia sono ben dimensionati e la molla del negativo posta nel tailcap è di spessore maggiore rispetto alle vecchie Zebralight,concludiamo con l'oring che aderisce perfettamente!

Immagine

Immagine



INTERFACCIA D'USO:

-Le operazioni avanzate riguardano solo il sublivello del massimo, e si puo' scegliere la luminosità se di 133 lumen o 95 lumen oppure se il sublivello massimo non vi serve potete scegliere di metterci lo strobo.

OPERAZIONI:

This light has 3 main levels (High, Medium, and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.


Basic Operation
Short click turns on the light to High or turns off the light.
Long click (press and hold for about 0.6 seconds) turns on the light to Low.

Advanced Operation and Configuration
Short click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low.
Press and hold to cycle from Low to High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes.
The second sub-level of the High can be configured after 6 double clicks. Double click (startng with the 7th) to cycle and select different brightness levels or strobes. Short click to turn off the light when finishing configurations. The selections for the second sub-level of the High are memorized after the light is turned off and through battery changes.



OUTPUT:

-La Zebra è molto luminosa,nonostante possa solo funzionare con alkaline o ni-mh o lithium.
-Io l'ho provata con una Soshine 2500mah ni-mh non ancora ho avuto il privilegio di inserirci una lithium.
-Il fascio è completamente flood (non a caso :lol:) la tinta è molto fredda ma non tende al blu ne al verde.



AUTONOMIA:

-Dopo circa 38 minuti inizia a scendere di luminosità graduatamente e non in modo repentino dal livello massimo.
-I 2 livelli max non sono piu' disponibili dopo circa 40 minuti, sono solo disponibili 4 livelli i due Low e i due Med.
-La torcia è stata alimentata da una soshine ni-mh 2500mha, ma penso che alimentandola con una eneloop si guadagni altri 3-4 minuti, mentre con una lithium ancora di piu'.


BEAMSHOT IN AMBIENTE CHIUSO:

18mm F/3,5 1/10s ISO 1600

0,2 LUMEN
Immagine

2,4 LUMEN
Immagine

7 LUMEN
Immagine

28 LUMEN
Immagine

133 LUMEN
Immagine

190 LUMEN
Immagine




BEAMSHOT ESTERNO


Scatto di controllo:

Immagine

Fenix LD10 AA ni-mh con lente diffusiva:

Immagine

Fenix LD10 14500 Li-ion con lente diffusiva:

Immagine

Thrunite 1C flood con lente diffusiva che usa la LD10:

Immagine

Zebralight H51F:

Immagine

Thrunite Catapult senza riflettore (SST-50):

Immagine



CONCLUSIONI:

PRO:

-Peso
-Emissione luminosa
-Dissipazione termica (consiglio di non tenerla accesa al massimo per piu' di 20 minuti)
-Design
-Qualità prezzo

CONTRO:

-Manca un forellino per il portachiavi
-Impossibilità di poter cambiare il tappo di gomma
-Macchinosa nell'esecuzione delle varie modalità di luce
-Non supporta le 14500.


Ne parliamo qui': https://www.cpfitaliaforum.it/phpbb/view ... 9523#p9523
Una Nitecore è per poco, una Fenix è per sempre...

Bloccato